SKC-203B
Description：
- Electroplating, Electro-deposition, Baking painting, Powder Coating, Anodizing treatment
- Material：6061 Anodized Aluminum Alloy
The alloying elements of A6061：
| Element | minimum | maximum |
|---|---|---|
| Si | 0.4% | 0.8% |
| Fe | - | 0.7% |
| Cu | 0.15% | 0.40% |
| Mn | - | 0.15% |
| Mg | 0.8% | 1.2% |
| Cr | 0.04% | 0.35% |
| Zn | - | 0.25% |
| Ti | - | 0.15% |
- Other elements not exceeding 0.15%, with each element limited to a maximum of 0.05%
- The remainder is Aluminum.
There is still information| A6061
Physical propert |
|
|---|---|
| Density(ρ) | 2.70 g/cm³ [1] |
| Mechanical property | |
| Young’s modulus(E) | 68.9 GPa（9,990 ksi） |
| Tensile strength(σt) | 124–290 MPa（18.0–42.1 ksi） |
| Tensile break elongation | 12–25% |
| Poisson’s ratio（ν） | 0.33 |
| Thermal performance | |
| Melting temperature(Tm) | 585 °C (1,085 °F) |
| Thermal conductivity（k） | 151–202 W/(m·K) |
| Coefficient of thermal expansion（α） | 2.32×10−5 K−1 |
| Specific heat capacity（c） | 897 J/(kg·K) |
| Electronic property | |
| Volume resistivity（ρ） | 32.5–39.2 nOhm·m |
